Search for media from: "Luca Alexe"

Cobas® 5800 System - Unpacking the Instrument

Cobas® 5800 System - Unpacking the Instrument

From  Luca Alexe 9 likes 588 plays 0  

Cobas® 5800 System - Setting up the Instrument

This procedure describes the steps to set up the instrument after a complete hardware installation.

From  Luca Alexe 1 likes 376 plays 0  

Cobas® 5800 System - Leveling the Instrument

This procedure is to show how to raise and level the instruments.

From  Luca Alexe 1 likes 264 plays 0  

Performing a run

This procedure describes the steps to perform a run on the instrument.

From  Luca Alexe 2 likes 207 plays 0  

Sample Loading Camera Calibration

This check is assisting the service engineer to calibrate the camera of the cobas® 5800 instrument.

From  Luca Alexe 0 likes 162 plays 0  

Instrument Dry Check

This check dries the fluidic system of the cobas® 5800 instrument with air in order to prepare it for storage or transportation.

From  Luca Alexe 0 likes 133 plays 0  

Instrument Interlock Check

Instrument Interlock Check This check is testing the interlock on the cobas® 5800.

From  Luca Alexe 0 likes 122 plays 0  

Instrument Flush Check

This check is flushing the fluidic system on the cobas® 5800 instrument with distilled water in order to prepare it for storage or transportation.

From  Luca Alexe 0 likes 110 plays 0  

Instrument initialization

This procedure describes the initialization of the instrument.

From  Luca Alexe 1 likes 95 plays 0  

Instrument preparation

This procedure describes the steps to prepare the instrument before performing a run.

From  Luca Alexe 0 likes 84 plays 0  

Instrument AD-Plate Handling Check

This check is testing the AD-Plate handling on the cobas® 5800 instrument.

From  Luca Alexe 1 likes 87 plays 0  

Instrument Teach Check

This teach check is teaching the instrument cobas® 5800.

From  Luca Alexe 0 likes 77 plays 0  

Instrument Prime Check

This check primes all liquid channels by washing and degasing on the cobas® 5800 instrument.

From  Luca Alexe 0 likes 75 plays 0  

Diluent Reservoir Tare Check

The calibration/taring of the weight sensor is done with an empty weight sensor in production. The SSW Check, in contrast, is done after the reservoir is placed and the tubing are attached, hence…

From  Luca Alexe 0 likes 73 plays 0  

Process Transfer Unit Teach Check

This check verifies that deviations between teach results are in specific range.

From  Luca Alexe 0 likes 60 plays 0  

Lysis Tubing Check

This check verifies the correct fluidic connection from:•Lysis reagent container 1 to Liquid waste 1 •Lysis reagent container 2 to Reagent pipetter (R2/R3) then further from Wash station to…

From  Luca Alexe 0 likes 45 plays 0